GLEASON HYPOID 116 CNC GEAR GENERATOR

Serial Number: 633915,
Control: FANUC 18T,
SPECIFICATIONS:
WORKPIECE CAPACITY:
Automotive Version (Jobbing Version) Y Extreme Ratio4:1 (10:1)
Y Cone Distance: Max (30 Deg. Spiral Angle
& 12in Diameter Cutter7.40in (9.00in
Full Depth, Maximum 1.00in
Face Width, Maximum 2.30in (2.750in ) Range of Tooth Numbers 5 to 150 Inclusive Maximum Gear Pitch Dia. of.(18.00in )
Typical 30 Deg. Spiral Ang. 14.00in
Gear Using 12in Dia. Cutter.14.00in (16.00in ) At The Following Ratios.10.50in (12.75in ) Diametral Pitch (Coarsest 2.00in
MACHINE SPECIFICATIONS:
Machine Center to Nose Of Spindle2.50in to 13.50in
Root Angle.-12 Deg.to 66 Deg.
(-12 Deg.to 90 Deg.) Sliding Base Withdraw 2in ,Advance 3in
Vertical Offset4.50in Up and Down Cutter Spindle Rotation Angle (Tilt)0 Deg. to 180 Deg.
Swivel Angle0 Deg. to 355 Deg.
Eccentric Angle0 Deg. to 160 Deg.
Cradle Angle0 Deg. to 180 Deg.
AXIS SPEEDS - MAXIMUM:
Y Cutter Spindle 115 RPM WORKSPINDLE DIMENSIONS:
Diameter of Tapered Hole at Large End 3 29/32in
Taper Per Foot.39/64in
Depth of Taper.6in
Diameter of Hole Through Spindle.3 1/16in
Diameter of Spindle Nose5 1/2in
Diameter of Spindle Nose5 1/2in
Length x Width x Height.126in x102in x 84in
(Width can be adjusted to 90in ) Weight24,000 lbs.

EQUIPPED WITH:
Enclosed Guarding,
Hydraulic Clamping,
6 Axis DRO,
Coolant System,
Stock Divide
Magnetic Chip Separator

This item is located in the United States

THIS ITEM HAS NOW BEEN SOLD

Please quote Ref No: 100737 in all correspondance